![]() ![]() A) 12.5+0.03 À ΑΙ Part 1 A) Part II When referring to the datum reference frame in the feature control frame, the - datum is given first followed by the and datums. Provide the actual dimensions as related to the drawing at Part II B, C, and D. Given the following drawing and related meaning, fill in the blanks at Part I A and B and at Part II A, B, C, and D. Identify at least three required conditions for datum feature simulators. Name at least four items that can be used as a datum feature simulator. Depending on which datum (primary, secondary, or tertiary) you are setting up, this rule will guide you as to how many points, lines or areas are required to establish a Datum Reference Frame.Identify the datum feature, the part, the simulated datum plane, the physical datum feature simulator, and the datum plane on the following illustration. It is important to remember the 3-2-1 Rule with Datum Targets. The real world set up will need to mimic these requirements. The drawing will specify the requirements for locations, quantities, sizes, and orientations of the datum targets.
0 Comments
Leave a Reply. |